Sound System Audio Meeting Room Afs-8200 Digital Feedback Destroyer Conference

• Customization: Available
• Certification: CE
• Monitor: LCD Screen
• Model NO.: AFS-8200
• Channel: 10 CH
• Supply: 48V
• Power Supply: AC~220V 50Hz
• Consumed Power: 30W
• Frequency Response: 20Hz-20kHz
• Input Impedance: <0.05%@1kHz
• Sampling Rate: 32kHz
• Snr: More Then 90dB
• Signal Delay: <11ms
• Cmrr: More Then 25dB, 50Hz-20kHz
• Transport Package: Export Carton
• Trademark: KGX
• Origin: Guangdong Province, Enping City
• HS Code: 8543709990
• Production Capacity: 2800

Product Description

Specification of technical parameter
1.10 channel input microphone balance, 6.35 XLR compound plug, 1 to 5 channel microphone is divid-ed into A area, 6 to 10 channel is divided into B area .
2.Each channel of microphone independent volume, independent of 48V power supply.
3.Area A microphone (MIC 1 to 4) and area B (MIC 6 to 9) can optional four select one automatic mixing function, also can four select one through function(choose).
4.A area MIC 5 and B area MIC 10 with the highest priority function, open microphone 5/10 and other automatic mute, close the microphone 5/10, other receiver cancelled automatically mute.Also can by pass alone of microphone 5/10 highest priority function.
5.A and B area of microphone has optional environmental noise of eliminating module independently,A and B area can separate the two threshold debugging (choose).
6.Lotus interface of line input , independent of the volume control (enter feedback function).
7.Lotus interface of line output , independent volume control.
8.Lotus interface of music input , independent of the volume control (not enter feedback function).
9.Lotus interface of remote input , independent volume control.
10.Lotus interface of remote output, independent volume control.
11.Lotus interface of MIC/line separate audio record output, L interface without music output, R interface with music output, independent volume control (without feedback).
12.A,B area of microphone and line input signal mixed high,middle and low tone control.
13.XLR interface of System main output , independent volume control panel, rear panel with limited amplitude adjustment.
14.A key control panel feedback inhibition, professional digital feedback inhibition module, direct/feedback mode conversion is convenient.
15.Professional dual-channel spectrum display, that can monitor output level and microphone distortion display, Also can be display the feedback/direct state, be clear at a glance.
16.Panel integrated to music, line, and system output potentiometer adjustment, convenient for field debugging.
17.Case size: 430X310X88MM

Technical parameter:
Power Supply: AC~220V,50Hz
Consumed Power: 30W
Frequency Response:20Hz~20KHz
Sampling Frequency: 32KHz
THD:<0.1%@1KHz
SNR:>90dB
Signal Delay: 11ms
CMRR:>25dB (50Hz~20KHz)
Input Impedance:MICinput:47KΩ,Line input:10KΩ,Music input:10KΩ,Remote input:10KΩ
Output Impedance:main output:220Ω,line output:1KΩ,record output:1KΩ,remote output:1KΩ



1.LCD display, can display the double channel of output level, the feedback (ACTIVE)/BYPASS
(BYPASS) state.
2.Feedback control switch, is used to BYPASS or access feedback (ACTIVE) function.
3.Calibration buttons for the environment (access feedback function works).
4.AB area and environment noise cancellation adjust potentiometer and indicator light (the light work).
5.Music input volume control knob.
6.The line input volume control knob.
7.Output level indicator.
8.The main output volume control knob of the system.
9.Power switch.

10. Power input,50 Hz AC 220V
11.Microphone 1 to 5 input, the five channel microphone for A zone, using XLR and 6.35 composite plugs, electronic balance input (6.35 interface with 48V power supply), 48V phantom power switch, the independent volume.Microphone 1 to 4 with selected one from four automatic mixing function (optional), microphone 5 in A region with the highest priority, open microphone 5, A zone of other four channel automatic mute, close the microphone 5, the remaining four channel microphone cancel the mute.Another area of A five channel microphone with environmental noise cancellation function (optional).
12.From top to bottom respectively is: four select one of A area automatic mixing bypass switch, A area of environmental noise elimination bypass switch, and A area of microphone 5 has highest priority bypass switch,press the by-pass, plays on access to the above functions.
13.Microphone 6 to 10 input , five channel microphone as area B, using XLR and 6.35 composite plugs, electronic balance input (6.35 interface with 48V power supply), 48V phantom power switch, and independent volume.Microphone 6 to 9 with four select one automatic mixing function (optional), microphone 10 in B area has the highest priority, open microphone 10, B area of others four channel microph one automatic mute , close the microphone 10, the remaining four channel microphone cancel the mute.And B area has five channel microphone with environmental noise cancellation function (optional).
14.From top to bottom are: B area for four select one of automatic mixing bypass switch, B area environmental noise elimination bypass switch, B area microphone 10 of highest priority bypass switch, press the by-pass, plays on access to the above functions.
15.MUSIC lotus input interface, independent volume, not into the feedback function, can connect a CD/DVD audio output interface.
16.LINE input lotus interface, independent volume, enter into the feedback function, and can connect with the hand in hand of output of the conference system.
17.(LINE )output interface, independent volume.
18.MIC/LINE REC (recording) output of lotusoutput interface (without feedback), independent volume.
Lotus interface only has microphone and line input signal, R lotus interface not only has a microphone and line signal interface, also has music signal, can access recorded according to the needs of different systems.
19.REMOTE lotus input interface, independent volume, directly to the main output, can connect with the echo processor output interface.
20.REMOTE lotus output interface, independent volume, and connect with the echo processor input interface.
21.XLR interface of main output, independent volume, can output to the mixer or power amplifier.
22.MIC/LINE the input signal of high,middle and low adjustment.
23.Machine cooling outlet, when installation, please do not block.

Adjustment method:
1.Control of conference MIC or hand in hand conference system, connection well just according to the picture above , turn down the host output volume, and host output to power amplifier or mixer, the microphone all open, you'll need to turn on each microphone volume to the appropriate location.
2.Control feedback switch to play on the panel to direct state, to eliminate the potentiometer to minimum AB area and environmental noise (lights out), adjust the main output volume knob, when the system just in noise condition, press the feedback switch, press the calibration switch again, and then continue to adjust the main output knob, the output of the receiver to get satisfactory sound pressure. And then adjust the AB area and environmental noise elimination potentiometer, the indicator lights up.
3.Depending on the MIC, if in the process of debugging,high-pitched sound too high or heaving bass is insufficient, can through the rear panel high bass tones knob corresponding attenuation or promotion, microphone sound to achieve satisfactory effect.

About Us

Enping Sounder Intelligent Technology Co.,Ltd has a full set of advanced production lines,testing instruments, standardization of scientific production management workshop.

We continues development and training of highly qualified management and technical personnel, has a strong technical backbone, specializing in product development and design, product innovation, improve. We have a vibrant,hard-working team of professionals. We adhere to professional and innovative design,strict production processes, quality management system, a good sales network and high-quality service.

we uphold the spirit of enterprise"integrity,professionalism, innovation, improvement",follow the quality management principles of "continuous improvement, high standards",and constantly improve the management system and corporate culture,to create the perfect product! A series of products with advanced technology,superb technology, superior performance selling all over the country and Southeast Asia, the majority of users praise and esteem our products.

Our Mission

Science and technology
Our pursuit of quality is tireless. On the premise of the rapid development of science and technology, we always stand in the perspective of global vision and find that the innovation of product technology can bring us the quality of our products. We are constantly looking for and apply more reliability and longer service life, stronger anti-interference ability of product equipment to support and ensure the high quality of our products, and with the progress of science and technology has been promoted.

Quality
We adhere to the global consistent quality standards, requirements for each production process, every batch of parts to be able to achieve excellence. We focus on quality of each user to us valuable advice, so that we can more quickly find our shortcomings and by constantly to staff training, to update equipment, more efficient to compensate and improve for process improvement. We always request and continue to pursue the higher specification of product process standards to ensure that every customer has always and support our products.

Service
We are willing to listen to the valuable opinions of each customer and respond in a timely response, because this is also our continuous perfection and improvement of our products and quality. We will provide a full range of tracking services for pre-sale, in sale and after-sales service, because we know that this is a key link to gain your trust and long-term cooperation in our products. We will respond to customers' questions in terms of technical application, product use, engineering support and warranty maintenance.

Pursue
We constantly improve and develop of new products to meet the market of modern science and technology, join hands with customers to develop together.

Certification


 Exhibition

 

FAQ

1.    Q: How many years has your company been established?
A: Our company has been established for 10 years. We are manufacturer and specializing in product development and design, product innovation, improve.

2.    Q: What is your payment term?
A: By T/T, L/C, Western Union 
(30% deposit in advance, 70% balance paid before delivery Or pay in full).

3.    Q: What is your warranty?
A: 2 year since the date of purchase.

4.    Q: Can you do OEM or ODM?
A: Yes, we can. Logo screen printing or design is available , if your order quantity meet our requirement.

5.    Q: How about your delivery date?
A: Usually 15-30 days, for sample delivery needs 1 day if it is available in stock.

If you have more question, please don't hesitate to contact us, We will reply you ASAP.